...other traffic) from a 2nd SSID on the Cisco AP to the pfSense DHCP server. Here's the general setup: Cisco 1140 AP with 2 SSIDs/VLANs. Native...is enabled for a range of IPs in the 10.100.1/24 subnet. I've also created...
...solution. Had our Cisco person check...small pack of basic 10/100 nics (any brand...connected to a 3COM 10/100 hub. Have you tried putting in the 10/100 nic yet and disabling...our comms guys and Cisco is going to replace...
...gotten it to work with any 10/100 based devices properly. This switch is connected to a Cisco 2620, PIX 520, and VPN...around this. In fact, no 10/100 based devices (access...cannot put Gb NIC's in the Cisco devices, so we need this...
...with integrated 3C920 NIC. They connect to a Cisco Catalyst 6500 switch, on a 48 port 10/100 switch module (WS-X6348-RJ-45) ...list all the ports. The gui provided by Cisco didn't show us the trunk setting was turned...
...doing was wiping out both the Cisco router and the Dell switch and starting from scratch. On the cisco router I created 3 VLAN's and 3 sub interfaces for the ethernet port, assigning each sub interface...2.30.34 from 10.2.10.100 will get a reply? ...
...go now with a gigabit Ethernet connection and an ugly...coverage linked to a CISCO E4200, the X51 has...RJ-45 Gigabit Ethernet 10/100/1000 jack? ...6Mbps. Each PC uses a Cisco AE1000 wireless USB...at this stage to use Ethernet, I have to use wireless...
...The routers at our sites are CISCO routers. The router at our main campus is a Cisco 3350 series. I'm not...mainboard with an onboard Intel 10/100 NIC. I have also lost http...through the console. We have Cisco Switches on the network but...
...When one group installed Cisco 2950 switches in place...3C920 (3C905B compatable 10/100 nic) is unlikely to be...central switch. Cisco 2950 looks something like...Now I've attached a 10/100 hub instead. No fancy...
...something reliable, probably Cisco. Dell - take this...Going to have to swap in a 10/100 catalyst. The two 3024's...emergency purchase of a Cisco 24 port gig switch...moved it back onto the cisco 10/100 and it has been fine...