Create an affordable, ultra-high-performance WiFi network with Dell PowerConnectT W-IAP134 and W-IAP135 dual-radio APs with built-in virtual controllers.
Create an affordable, ultra-high-performance WiFi network with PowerConnect W-IAP134 and W-IAP135 dual-radio APs with built-in virtual controllers.
Dual-band, dual-radio APs with up to 450Mbps data rate per radio and external (W-IAP134) and internal (W-IAP135) antenna options
Built-in virtual controller. eliminating the need for a separate controller
3x3 multiple-input, multiple-output (MIMO), dual-band radios with three spatial streams
Ultrahigh-performance for high-density 802.11n environments
Gain wire-like performance in high-density WiFi environments with PowerConnect W-AP134 and W-AP135 multifunction dual-radio 802.11n indoor access points.
Two MIMO dual-band radios with 450Mbps per radio
External (W-AP134) and internal (W-AP135) antenna options
Adaptive Radio Management (ARM) technology
Broadcom® NetXtreme™ II 5709 Ethernet Adapter w/TOE
The Broadcom® NetXtreme™ II 5709 Dual Port Ethernet PCI Express Card introduces a new level of cost effective networking performance with increased bandwidth, reduced latency and lower server CPU utilization. Combining standard Ethernet functionality at Gigabit speeds with Offload technology provides accelerated networking once only achieved with expensive and proprietary high-end computing solutions.
TCP/IP Offload Engine (TOE) for Windows, significantly reduces CPU utilization
Powerful software utilities diagnose and test the adapter for easy troubleshooting
Heterogeneous Teaming for Smart Load Balancing and Failover
Receive Side Scaling to balance incoming traffic across multiple CPUs
Broadcom® NetXtreme™ II 5708 Single Port Ethernet PCI-Express Network Interface Card with TOE
The NetXtreme II 5708 Single Port Ethernet PC-Express NIC with TOE is a new class of network adapter capable of providing accelerated networking with TCP/IP (TOE) technology. With NetXtreme II you can increase application performance, reduce latency and serve more users while freeing up the host server CPU to process applications your business depends on.
Please call for latest prices
Resilient Stacking and Advanced Switching Capabilities
Ideal for resilient, highly available data center server connectivity or long-haul fiber connectivity.
24 port copper Gigabit Ethernet Layer 3 switch
4 combo ports (Gigabit Ethernet SFP fiber ports or 10/100/1000 copper)
High performance stacking capabilities
Helping extend virtualization efficiently throughout data centres.
Dell M8428-k is a converged 10GbE switch module for the Dell PowerEdge M1000e Modular Blade Enclosure, with 600ns low-latency, wire-speed cut-through 10GbE performance, Fibre Channel over Ethernet (FCoE) switching and low-latency 8Gb Fibre Channel (FC) switching and connectivity.
272GB full duplex bandwidth across 28 ports
Low latency: 600 nano second
MAC addresses: 32,000 MAC address table entries
16 auto negotiated 1G or 10GbE ports
Maximum frame size: 2112-byte Fibre Channel payload; 9048-byte Ethernet frame
Classes of Service: Class 2, Class 3, Class F (inter-switch frames)
Advanced 48-port blade switch offering from Dell.
The Dell Networking M6348 is one of the most advanced blade switch offerings from Dell, with advanced core switching capabilities for today's data center. This 48-port GbE Layer 3 switch supports stacking, offers integrated 10 Gigabit uplink ports and is IP version 6 (IPv6)-certified, enabling broader worldwide scalability.
32 internal Gigabit Ethernet server ports (two per server blade)
16 external integrated RJ45 Gigabit Ethernet ports
Stacking for up to 1 2systems
Supports CX4 and SFP+ 10GE uplink connections
VLAN support for tagging and port-based as per IEEE 802.1Q
Intel Virtualization Technology for Connectivity
Provides high-performing, multi-port Gigabit connectivity in a multi-core platform as well as in a virtualized environment.
Transfer rate of 1Gb/10Gb
Designed for Intel Multi-core Processor-based Dell PowerEdge Servers
Please call for latest prices
Stackable Layer 3 Switch
The PowerConnect™ 6224 is a high performance switch offering with advanced core switching capabilities for the small to medium enterprise.
24-port Gigabit Ethernet Layer 3 switch
Stacking for up to twelve systems
Supports 10GBase T and SFP+ 10GE Modules
One tool for both environments.
Manage 12th-generation Dell servers from within your VMware vCenter console through an agent-free plug-in that's now available in six languages. Save time and reduce the need for multiple management consoles with the Dell Management Plug-in for VMware vCenter. Set up your host in as few as nine steps through the use of hypervisor templates.
Reduce administrative complexity
Centralize control and improve consistency
Help minimize risk to your data center
Improve consistency and control across your data center
Simplify data center oversight and threat identification
Dual-port Gigabit Ethernet server adapter designed for multi-core processors and optimized for virtualization
The new Intel® Gigabit ET Dual Port Server Adapter for the enterprise network and data center. Features include security, support for multi-core processors, native iSCSI support, and optimized for server virtualization.
Dual speed: 1000BASE-T and 100BASE-T
Category-5 Up to 100 meters (RJ-45, copper)
IPSec and LinkSec Security Features
Ideal for larger storage area networks (SANs).
The Brocade M5424 is a flexible platform that delivers advanced functionality, performance, manageability, scalability and security. Up to 16 internal fabric ports and up to 8 2GB/4GB/8GB auto-sensing uplinks.
Aggregate bandwidth: 384 Gbit/sec end-to-end (full duplex)
Fabric latency: 700 ns with no contention, cut through routing at 8 Gbit/sec
Maximum frame size: 2112-byte payload
Classes of Service: Class 2, Class 3, Class F (inter-switch frames)
Aggregate bandwidth of 128 Gbit/sec end-to-end
Build an Active Fabric network.
Automate design, deployment and monitoring of data center network with Active Fabric Manager. Starting from the design and wiring plan to the configuration of the fabric, the design wizard makes it easy to improve the throughput and dependability of your data center network.
10GbE or 40GbE leaf-spine architecture for non-blocking, line-rate communication
Extensive and cost-effective scalability
Vendor-agnostic, standards-based Data Center Fabric
Automate with open standards.
Bring unified, open-source automation and dynamic control to third-party virtual devices on your network with the Dell Force10 Open Automation Framework.
Gain modular control across Dell Force10 switches and routers
Combine Dell Force10 switches with PowerEdge servers for powerful virtualization
Increase network availability and streamline management through custom scripts
Smart Scripting supports Perl and Python
Accelerate switch installation and reduce errors
Streamline management through custom scripts
Help connectivity and security between virtual machines in virtualized environments
Dell 8/4 Gbps FC Pass-Through Module for M1000e Blade Enclosure.
The Dell 8/4 Gbps FC Pass-Through Module provides data centers with existing storage area network (SAN) infrastructures a direct Fibre Channel connection between the servers and the SAN. The module offers sixteen 8/4/2 Gbps Fibre Channel one-to-one, non-switched connections between the blade servers and the SAN.
Provides Fibre Channel connectivity for Dell blades
Auto-negotiates link speeds of 8/4/2 Gbps
Features 16 external ports with optical 8 Gbps small form-factor pluggable + (SFP+) transceivers
Performance: 8 Gbit/sec line speed with backward compatibility to 4, 2 and 1 Gbit/sec line speed
8, 4 or 2 Gbps Fibre Channel connectivity on each port can match existing server and SAN installations
Broadcom NetXtreme II 57711
Dual Port 10gb Ethernet Mezzanine Card with TOE and iSCSI Offload for PowerEdge M-Series Blades
TCP/IP Offload Engine (TOE) for Windows®, significantly reduces CPU utilization
Host Bus Adapter (HBA) functionality supporting accelerated iSCSI
iSCSI remote boot support
Compact, all-in-one branch office wireless access controllers
The PowerConnect W-650 and W-651 Controllers with ArubaOS® Controller Software are compact, all-in-one networking solutions, each supporting a firewall, wireless LAN controller, 8-port Ethernet switch, IP router, site-to-site VPN edge device and file and print server.
Controls up to 16 PowerConnect W-Series access points
Optional 2Gbps stateful firewall
Optional wireless intrusion protection
Quad Port Gigabit Ethernet Mezzanine Card featuring TOE (TCP/IP Offload Engine) for PowerEdge M-Series Blades
The Broadcom® NetXtreme™ II 5709 Quad Port Gigabit Ethernet Mezzanine Card featuring TOE (TCP/IP Offload Engine) is a quad port Gigabit Ethernet adapter able to perform accelerated networking on standard Ethernet for PowerEdge™ M1000E-Series Blade Servers.
Full-featured, integrated mobility access controller
The PowerConnect W-3400 Controller is a full-featured, integrated mobility access controller that addresses a wide range of wireless network mobility, security and remote networking requirements for medium to large enterprise deployments.
Controls up to 64 PowerConnect W-Series access points
Standard advanced authentication, encryption, wireless radio management and Layer 2/Layer 3 networking features
Optional 4Gbps stateful firewall
Highly available Gigabit Ethernet fixed port switch with 10GB uplinks.
Help meet your network switching needs, no matter how large your organization, with the Dell Networking 7048R. It features 48 ports of wire-speed L3 GbE plus robust security and enterprise management capabilities. The 7048R offers two optional flexible airflow configurations to align with front-to-back and back-to-front server installations. It also features internal hot-swap power supplies and fans to increase availability and save precious rack space.
Port Attributes: 48 10/100/1000BASE-T auto-sensing GbE switching ports
Switch Fabric Capacity: 224.0 Gbps
Forwarding Rate: 160 Mpps
MAC Addresses: up to 32,000
CPU DRAM: 1GB
Flash memory: 64 MB
Packet buffer memory: 4 MB