Before Working Inside Your Computer.....................................................................................................................5 Turning Off Your Computer.......................................................................................................................
1. Turn the printer off. 2. Wait 10 seconds. 3. Turn the printer on. 4. Determine if the issue still occurs. 5. Determine the paper specifications that were used. -> Refer to the online User's Guide for more information which paper type is compatible with 250-Sheet Tray. 6.
The issue has been isolated to incompatibility with Dell Diagnostics after the 5.1.1-0040 (A05) firmware upgrade to the PERC5/i or PERC5/e. The failure occurs on all SATA hard drives in the system. The issue is not seen on SAS hard drives.
When multiple users are running programs with a lot of clipboard activity, a computer running Windows NT 4.0, Terminal Server Edition, may display a blue-screen error message with STOP 0x1E in Win32k.sys. This problem occurs because of a stress...
On a computer that has Windows NT 4.0, Terminal Server Edition installed, the following error message may be displayed: Stop 0x00000050 PAGE_FAULT_IN_NONPAGED_AREA This problem occurs because the Win32k.sys file is attempting to reference released...
Terminal Server clients go into a "down" state and cannot be reset. If a disconnected session has an active "Hard Error" dialog box that is generated by a DOS or 16-bit program, it cannot be reset. If a reset is attempted on the workstation, it...
If the Simple Mail Transfer Protocol (SMTP) service (Smtpsvc.dll) connects to a remote server, but the remote server ends the connection before sending a 220 response, the SMTP service may continuously attempt to reconnect to the remote server...
Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems might occur if you modify the registry incorrectly. Therefore, make sure that you follow these steps carefully. For added protection, back up the registry before you modify it.
This article describes how to use the Regini.exe tool in the Microsoft Windows NT 4.0 Resource Kit to modify registry permissions from within a script. It may be useful to use the Regini tool to modify registry permissions from within a script to...
After you install Windows NT Server 4.0, Terminal Server Edition Service Pack 4 and then try to install DHCP, Remote Access Service, PPTP, and other components, the following Setup message may be displayed: Please insert the disk labeled 'Windows...
Problems may occur when you run either a macro, a query on an extensive Microsoft Access database, or when you use either Rational or Microsoft Visual Test scripts. The most apparent problem is when a user session is disconnected when using a...
When you use the Configuration Back-Up option in the HTML Administrator version of the Internet Server Manager program in Microsoft Internet Information Server (IIS) 4.0, the current date for the stored configuration may be displayed improperly if the...
Following the installation of a program, your computer running Windows NT 4.0 Terminal Server encounters an access violation in Termsrv.exe. After this access violation, users are unable to connect to the Terminal Server computer. This behavior...
You may experience a STOP 0x000000050 blue screen STOP error message in Windows NT, Terminal Server Edition. The problem appears to be related to a specific font which causes a trap in Win32k.sys. Windows NT Server 4.0, Terminal Server...
