...tried adding a PERC 5/i or PERC 6/i RAID card to a PowerEdge SC440? I am aware that Dell usually does not ship entry...issue? I'd love to hear if anyone has got a PowerEdge SC440 machine running with a PERC 5/i or PERC 6/i card...12/21/2009 | (Forums)
Hi I will try and keep this as brief as possible. I have a poweredge Sc440. I am selling it so deleted all the users off the system. Next time I started it, it asked me for a pasword for Administrator...2/9/2010 | (Forums)
I've got a PowerEdge SC440 system that I think the power supply has gone out on. My problems started with a hard drive failure (occasional errors and eventually...6/11/2010 | (Forums)
I have a dell power edge server SC440 running windows small business server 2003. In the device manager I have a yellow question mark under other and I have identified...7/18/2010 | (Forums)
Dear folks, Has anyone used PERC 5/E on PowerEdge SC440 to configure a RAID system for MD3000, please ? It says in the manual that it just need to type +9/7/2010 | (Forums)
I am considerung upgrading my SC440 and I found the E7600, which - in theory - should meet the specs...able to fire up my server. I guess there are many other happy SC440-users out there enjoying this litte silent and dependable miracle...3/30/2010 | (Forums)
...do any changes in the BIOS. There is no input. Why the DELL has no PS/2 ports. I checked various Forum many has USB port problem for SC440 server, seems that the DELL design is faulty. Any suggestion from any body 3/30/2011 | (Forums)
Can you install 2008 , x86 or x64 on that server without any driver problems? If you've tried, please leave a reply. 7/6/2011 | (Forums)
A customer got a two year old Poweredge SC440 with a SAS5/IR PCI Express card. The Windows...recommend a hardware RAID 1 controller for the SC440? Would the PERC 6/i work in the SC440? 1/26/2013 | (Forums)
Hi I just popped a Q6600 with 8MB L2 cache into my SC440 replacing an old pentium-D. At the moment in the bios it shows up as a Q6600 but only shows 4MB L2 cache, instead of...9/23/2010 | (Forums)
Running SBS 2003 R2 on an SC440. SAS 5iR controller w/2x WD2500YS 250GB SATA drives in RAID1. Early am Sept. 29th the server restarted itself...10/1/2011 | (Forums)
I recently upgraded my 440 to a quad core cpu and 8 gig of RAM. I've been debating whether or not to sell the old cpu and ram (4 gig) as they are only a year old or to look for an older system that I can toss them into. Will these components work in the 430?(Forums)
Hello I have a PE SC1440 with controler card sas 5i/r with 2 sata drives 80GB (mirroring), and my OS 2003 partition C is short. I want to replace 80GBs volume raid1 disk by 500GB volume raid 1 first. And extand the partition C, E and F on second part . How to make this part one and two ? I4/22/2011 | (Forums)
Willem De Wolf, The issue is a matter of unsupported memory. The dimms you are using are likely not supported in the SC440. If you can give me the specifics about the dimms, I could try to clarify this for you. Let me know.
I rebooted the computer and it won't boot anymore to Windows 2008. It says, "Searching for devices at HBA 0... Then after that, it says, "Device not available at HBA 0". Here's a picture. Please advise.(Forums)
thanks for your response, today i looked inside. there is a cable scsi cable attached from tapedriver to a scsi adapter, named ATTO ExpressPCI PSC card. I looked for the drivers on Attotech.com. the latest drivers 1.68, are too old for this OS.
Windows Home Server isn't actually supported on Dell Servers, that being said. What expansion cards do you have installed in the server? The drivers you can try using are the Windows Server 2008R2 version on our support page. Let me know how it goes.
I have two Poweredge SC 430 servers and one Poweredge SC 440 server. What I want to do is to increase the speed of the memory. One has 533 MHz. I would like to upgrade memory to either 667 MHz or 800 MHz. Is this doable? Do I need to...4/18/2008 | (Forums)
The issue appears to possibly be the raid controller, or an HBA that is added to the server for storage. When you hit F1, does the server boot to the OS? If not then power down the server and then reseat the controller in its slot.
According to the specs, the Xeon 3060 is the fastest processor you can put on the Intel 3000 chipset in a PowerEdge SC440: www.dell.com/.../PESC440_spec_ap.pdf ark.intel.com/.../Intel-Xeon-Processor-3060-4M-Cache-2...