QLogic's 3rd generation CNA mezzanine card for blade servers
Converge your LAN and Fibre Channel SAN infrastructures cost effectively with a CNA mezzanine adapter that offers 10Gbps speed for blade environments.
High performance 10Gbps Fibre Channel over Ethernet (FCoE) connectivity for blade environments
PCI Express Gen2 x8 data transfer on the host side
10GbE Ethernet to PCI Express Converged Network Adapter (CNA)
Help drive blade server virtualization with the QLogic 8200 Series. It offers 10GbE Fibre Channel over Ethernet (FCoE) connectivity and investment protection for data centers with existing FC SANs.
Simultaneous data and storage networking across 10GbE Ethernet while supporting PCI Express Gen2 x8 data transfer on the host side
LAN & SAN convergence lowers HBA/NIC, cabling, power, cooling and management costs
Works with existing Fibre Channel storage, switches and management utilities to help protect your investment
QLogic's 3rd generation CNA for Dell PowerEdge servers
Support 10GbE networking and storage protocols concurrently with the flexible partitioning of the QLogic QLE8262 10Gbps Ethernet-to-PCIe CNA.
High performance 10Gbps Fibre Channel over Ethernet (FCoE) connectivity
PCI Express Gen2 x8 data transfer on the host side
Quad Port Gigabit Ethernet Mezzanine Card featuring TOE (TCP/IP Offload Engine) for PowerEdge M-Series Blades
The Broadcom® NetXtreme™ II 5709 Quad Port Gigabit Ethernet Mezzanine Card featuring TOE (TCP/IP Offload Engine) is a quad port Gigabit Ethernet adapter able to perform accelerated networking on standard Ethernet for PowerEdge™ M1000E-Series Blade Servers.
Switch Designed for Dell PowerEdge M1000e Server Enclosures
Dell combines flexible modularity with 10Gb Ethernet in the innovative design of the Dell PowerConnect M8024 Switch.
24-ports of 10Gb Ethernet
Ideal for I/O intensive environments
Built upon FlexIO architecture
NetXtreme II 5709 DC Gigabit Ethernet Adapter w/TOE and iSCSI
The NetXtreme II 5709 Dual Port Ethernet PC-Express NIC with TOE and iSCSI support combines both accelerated networking and storage over your existing Ethernet infrastructure. The NetXtreme II can help to increase application performance and reduce latency, process iSCSI block storage, and boot from your SAN with iSCSI Boot while utilizing your Ethernet cabling and switches.
TCP/IP Offload Engine (TOE) for Windows, significantly reduces CPU utilization
Host Bus Adapter functionality with accelerated iSCSI
iSCSI Boot supporting diskless boot from SAN
Heterogeneous teaming for smart load balancing and failover
Receive Side Scaling to balance incoming traffic across multiple CPUs
Enterprise-class blade server connectivity for next-generation virtualized data centers
Brocade BR1741M-k converged network adapter (CNA) enables enterprise-class blade server connectivity for next-generation virtualized data centers, offering reliable 10 Gbps Ethernet (10GbE) connectivity for Dell blade servers.
High-performance line-rate 10GbE
Data Center Bridging (DCB) support
Unified Fibre Channel, FCoE, and Ethernet driver stack
Low-power GbE solution optimized for enterprise applications
Bring dual port GbE connectivity to your Dell PowerEdge single- and dual-socket server room with a NIC built on the market-proven Broadcom architecture.
Two lane PCIe data path operable in x4, x8 and x16 slots
Two Ethernet ports
Dual-Port 8Gbps Host Bus Adapter
The Dell LPe-1205-M HBA is a dual-channel 8Gbps fibre channel HBA designed for use in PowerEdge M1000e blade server enclosures.
Supports PCIe 2.0
8 Gb/s link speed
Mezzanine form factor for use in PowerEdge M1000e blade server enclosures
High-performance throughput for clustered computing environments.
Maximize the throughput of your high-performance network with a mezzanine card designed for clustered and parallel-application server environments.
Accelerates and consolidates storage I/O in virtual environments.
Scales to tens of thousands of nodes.
Enables guaranteed bandwidth and low-latency services.
Helping extend virtualization efficiently throughout data centers
Dell M8428-k is a converged 10GbE switch module for the Dell PowerEdge M1000e Modular Blade Enclosure, with 600ns low-latency, wire-speed cut-through 10GbE performance, Fibre Channel over Ethernet (FCoE) switching and low-latency 8Gb Fibre Channel (FC) switching and connectivity.
Extend server virtualization to the network
Optimize data center infrastructure
Integrate seamlessly with existing infrastructure
Cisco Catalyst Blade Switch 3130X for the Dell PowerEdge M1000e
Supports up to 4 10/100/1000BASE-T ports and two X2 10 Gigabit Ethernet ports
Provides 2 VBS ports for virtualizing up to 8 switches across multiple chassis with the same rack
16 Port Gigabit Ethernet Pass-Through for M1000e Blade Enclosure
Integrate M-Series blades seamlessly into the Ethernet infrastructure of your choice.
Gb Ethernet connectivity for Dell blades
16x 10/100/1000Mb copper RJ45 connections
No need for regular firmware updates
Transparently connect Dell M-Series blade servers into the LAN of your choice.
Directly connect 10Gb M-Series blade servers to external 10GbE networks through Dell 10Gb Ethernet Pass-Through Modules. Link to top-of-rack and end-of-row switches, or extend the distance using SR and LR optical transceivers or direct-attach (TwinAx) copper.
Up to six (10Gb-k) or four (10Gb II) hot-swappable I/O modules per blade chassis
SFP+ external connectors
Short- and long-distance connection options
Layer 3 Switch for M1000e Blade Server Enclosures
The PowerConnect™ M6220 is a key component of the FlexIO architecture of the PowerEdge™ M1000e Modular Server Enclosure.
High-performance 24-port Ethernet switch
Breakthrough modular bay design
Supports 10GBase T and SFP+ 10GE Modules
Simplified connectivity for your PowerEdge M1000e blade enclosure
Get enterprise-class performance, improved scalability and easy deployment with the Dell 8/4Gbps Fibre Channel (FC) SAN Module, a flexible, standards-based platform that works seamlessly with Dell PowerEdge blade servers.
24 universal ports (E-Port, F-Port, and N-Port) available in all three models
Full fabric architecture with 239 switches maximum
Aggregate bandwidth of 128 Gbit/sec end-to-end
Dual-Port 10GbE Network Daughter Card (NDC) for Dell® Blade Servers
The Broadcom® 57712-K Network Daughter Card (NDC) is a flexible LAN-on motherboard networking solution that supports switch independent NIC Partitioning - giving administrators the ability to divide a single network port into as many as four partitions and allocate bandwidth as needed.
Form Factor: 2.45" x 3.35"
Transfer Rate: 10Gbps
Ethernet Ports: Two
10GbE mezzanine card optimized for high performance computing and virtual server environments.
Help improve blade server performance and flexibility with a dual port mezzanine card that delivers 10GbE performance and advanced NIC partitioning (NPAR).
Data path: 8 lanes
Ethernet ports: Two 10GbE
Transfer rate: 10Gbps
10GbE speeds for Dell PowerEdge tower and rack servers
Bring the speed of dual 10GbE connectivity to your Dell PowerEdge rack or tower servers with a Broadcom Converged Network Adaptor (CNA)
Two ports of 10GbE or FC8 connectivity
Data Center Bridging (DCB)
Fabric-independent NIC partitioning (NPAR)
Dual-Port Quad & Dual Data Rate InfiniBand Host Channel Adapters (HCA) for M-Series Blades
Performance, Scalability and Efficiency - in Two Flexible Solutions
Dual 4X InfiniBand ports
Supports PCI Express 2.0 x8 (1.1 compatible)
10, 20, or 40Gb/s Transfer Rate