 | If anybody has other recommendations about noise levels, please share. I have been thinking about using passive cooling / water cooling, but I'd rather not go down this route as it is pricy / complex to do. 5/20/2013 (Latest Version) | (Forums) |
| |
| You may want to change your controller to read ahead, write back for optimal performance. This is the suggested setup for our controllers. Let us know the results after making the changes. Regards, 5/20/2013 (Latest Version) | (Forums) |
| |
| I have a dell venue pro 8g when any digit number beginning with # or *, example # 123 # or * 150 # says failure, sometimes I bring the screen but not allow me to select. 5/20/2013 (Latest Version) | (Forums) |
| |
| To install the printers, most will install without any problems. Some printers will have problems installing because of Firewalls, Virus Programs and Security Suites. Sometimes disabling the Firewall, Virus Programs and the Security Suites will allow the printer to communicate and install. 5/20/2013 (Latest Version) | (TechCenter Wiki) |
| |
| One of the requirements for mobile devices at work is TPM/Bitlocker, so I was excited to see that the Dell Latitude ST was TPM/BitLocker enable/ready. However, what good is Bitlocker without a keyboard? 5/20/2013 (Latest Version) | (Forums) |
| |
| The VGA output is very corrupted, but I do make out the Dell logo and that's it. Looks kinda' like this: http://lekernel.net/blog/wp-content/uploads/2009/01/unrefreshed_dram.jpg I've tried keeping D pressed while booting and the laptop display shows the normal full screen colors. 5/20/2013 (Latest Version) | (Forums) |
| |
| I managed to finally find some time to upgrade my trusty (but loud) XPS Gen 5 to Windows 7. The major components changed were RAM (6GB total=2x2GB+2x1GB), a new SSD (Seagate 256GB SDSSDHP-256G-G25), and newly purchased Dell 21.5" Ultrasharp U2212HM monitor. 5/20/2013 (Latest Version) | (Forums) |
| |
| When I push the power button, all that happens is the fan turns on and in few seconds there is a putt sound and that's it. Tried the usual trick of holding the power button after removing the battery to drain out the additional charge but no luck.. 5/20/2013 (Latest Version) | (Forums) |
| |
| i have done a bios reset and battery removal....cannot access the bios.....need to make changes....i have seen the f2 light up but i am still not able to boot or change bios....any advice would be appreciated 5/20/2013 (Latest Version) | (Forums) |
| |
| From a cold start, it will power up for a few seconds (loud fan noise), then power off, then power on for a few seconds, then power off, then power on and proceed as normal. So from a cold start it will start up a total of 3 times. 5/20/2013 (Latest Version) | (Forums) |
| |
| I did the usual, reset the cartridge and made sure the installation was properly placed. Oddly, if I shut the printer off and startup again, the copy will work for only one printed page, then I get the message. 5/20/2013 (Latest Version) | (Forums) |
| |
| I made the unfortunate choice to buy an Inspiron 15R SE (7520). Unfortunately, I am now 5 days past my 30 day return and I have been told by the company that I cannot return it at this point. I have spoken to tech and they cannot seem to fix the problem. 5/20/2013 (Latest Version) | (Forums) |
| |
