|
Search Results for "duplex network cable"

Narrow your selection:

Community Discussions

See Results from:

Find Results In:

Showing 1-20 of 220 Results
1  2  3  4  5  6
...have tried forcing the the speed of these nics to 10mbps full duplex and has occasionally worked, but its like the onboard nic...http://en.community.dell.com/support-forums/network-internet-wireless/f/3324/p/19302171/19580684...
(Forums)

...2010) Problems: Network transfers are very slow...unique to the M4500 in the network. The LAN adapter is set to 1Gbps full duplex. The switch is 1Gps...other devices in the network are fine, just the M4500...so far: New Cat 6 cables from Laptop to switch...
4/14/2014  |  (Forums)

...though there is cable connected to the...computer to the cable and it connects...uninstalled the network card drivers...Link speed and duplex setting to 100MPS and Full duplex instead of Auto and...and tested the network cable which passed...
(Forums)

...looses a connection to network intermittently. Restarting the "network" service on the server...light. Speed/duplex set to both auto...Only restarting the network service on the server...Replaced the network cable. Connected...
1/29/2010  |  (Forums)

...even tried moving the cable from one port to the...Controller Module DNS/Network name: 3Z2J6J1 ...speed: 100 Mbps Duplex mode: Full duplex Network configuration: Static...Duplex mode: Full duplex Network configuration: Static...
5/11/2009  |  (Forums)

...is to AUTO detect the network speed and able to connect at 100MB Full Duplex. Recently it is giving...IP Address" then says "Network cable unplugged". After Manually...connects only in 10 MB Half-Duplex. (will get 6 Mbps network...
(Forums)

...rom; DVD+RW; broadcom gigabit network card; comcast cable internet; cat 5 hardwired LAN from cable modem to linksys router to linksys...to desktop; sony vaio laptop on network; Dell 5100cn laser duplex network printer through linksys...
1/18/2008  |  (Forums)

...settings 13. Ensure Duplex and speed settings match settings on Network Switch. DRAC is capable of 100 Mbps full duplex. Also check if network switch logs show any errors...port to which the network cable is connected is part of a...
2/16/2012  |  (Wikis)

...port. Also, use another network cable that is known good, and has...system to a specific speed and duplex. Then, within the network device properties of the system, similarly hard-set the network card. Do not allow auto-negotiation...

...but negotiations settles for 100MBit/s half duplex. The other device (and that one also before) goes to 100MBit/s full duplex. We tried changing network cables, connecting to other switch ports, etc. everything...
11/13/2009  |  (Forums)

...2-3 weeks old. It simply won't register any network cable. It always says "network cable unplugged", no matter what cable i use...Manual LAN IP -Setting the speed to 10half duplex, 10 full duplex, 100 half duplex, and 100...
8/8/2007  |  (Forums)

...continue to the next CMC Network Settings screen. 4. Select the duplex mode (half or full...environment. NOTE: The Network Speed and Duplex Mode settings are...Negotiation. Such a duplex mismatch will result in a slow network connection. Press...
11/2/2011  |  (Wikis)

...100 Integrated Controller: The network link is down. Check to make sure the network cable is properly connected. 2...100 Integrated Controller: Network controller configured for 100Mb full-duplex link. 3. The system detected...
11/24/2005  |  (Forums)

...100 Integrated Controller: The network link is down. Check to make sure the network cable is properly connected. 2...100 Integrated Controller: Network controller configured for 100Mb full-duplex link. 3. The system detected...
11/24/2005  |  (Forums)

...100 Integrated Controller: The network link is down. Check to make sure the network cable is properly connected. 2...100 Integrated Controller: Network controller configured for 100Mb full-duplex link. 3. The system detected...
12/4/2005  |  (Forums)

...anything, but i would hard code your network interface card to a certain speed...server. try to get into your network cards properties and set this to 10MB/Full Duplex to be safe. even though your network card is capable of 100MB, you...

...all-around, regardless of O/S or network interface selected. I see others...Ultimate 32 bit, changing Ethernet cables, upgrading to the latest D630 A18 BIOS and fiddling with the network Speed/Duplex setting, nothing seems to help...
(Forums)

...with an Intel(R) PRO/100 M Network Card, and i am connected to a fibre cable (10Mbit / Full Duplex connection) running Windows XP...would do if you where running the network with 10MBit / Half Duplex. I have tried to update my...
1/16/2004  |  (Forums)

...seconds of 'acquiring network address', after which...connectivity", and "a network cable has been unplugged...adapter's Link Speed & Duplex setting frum Auto Detect...then connect both to my network and to the Internet...
12/22/2006  |  (Forums)

...make it works for your network. For example, if you...configured fixed speed/duplex on one side and auto...incorrectly setup fixed speed/duplex. So that's why I suggested...you verify your fiber cable? Sometime bad cable...some routers or other network equipments? Perhaps...

1  2  3  4  5  6
Showing 1-20 of 220 Results
Provide Search Feedback
Were you satisfied with your search experience?
Yes
No
| Write and Tell Us More
snUX04