|
Search Results for "perc 5/i firmware"

Narrow your selection:

Community Discussions

See Results from:

Find Results In:

Showing 61-80 of 975 Results
1  2  3  4  5  6
...ESXi4.0 - perc H700 - 10GB... Every time I try and complete a firmware update, the setup stalls/fails at 5%, collecting...failed to update firmware: firmware failed' I have only managed to get the PERC H700 updated by...

...do it, but it works. I pay out the ass for it...ignoring the early x25 firmware issues. The 310, 710...don't customize the firmware except for maybe asking...will be sourced from? I don't. SLC and MLC...mean when I'm spending 5 digits on a R720 and there...
5/8/2014  |  (Forums)

...firmware (BIOS, NIC, PERC, iDRAC, LifeCycle Controller...pre-OS environment (am I right?). So I ran USC-LCE and executed...Platform Update" option. I did it subsequently with...Results: 1) A lot of firmware was updated, e.g...4.0.445 --> 1.5.1.57, etc. ...
5/17/2012  |  (Forums)

...storage limit on the Perc controller.. It does...Fixed an issue where PERC card allow RAID6 volume...not support RAID6 5. Addressed an restriction...04/11 sense data in firmware 8. Enhanced Backplane...reset handling after firmware download 9. Added improvements for handling PERC5 and PERC6 co-existence...

...problems jumps the older the firmware you are talking about - yours...about some of the original firmware, you might have seen some...Here is the manual for the PERC 5 controllers: http...as it is compared with the PERC 6: http://www.dell...

...providing me with the this information. I am aware of the need for applying firmware updates. The part I was not clear on was the PERC 5/i integrated storage limitation...done before applying the updated firmware--before I change out all the...

...but the SAS 6/iR and PERC 5/6/7/8 are not. Although the PERC firmware release notes do not...particular version, I seem to remember that...supported in the earliest firmware versions of the PERC 5. None of the release...

...updated the raid driver (perc 5/i) to 2.24.0.32 A07 I updated the perc 5/i firmware to 5.2.2-0072 A09 I updated... 5.2.3790.4173 I see a 5.2.2-0076 firmware for perc 5E? I see no newer driver.
1/29/2013  |  (Forums)

...and 3x SATA disks in RAID 5 configuration. I...RAID is degraded however I can't see any such indication...Administrator. Also when I look in RAID BIOS (Ctrl-R...the problem and how can I upgrade the firmware on PERC 5/i? Many Thanks...
11/30/2010  |  (Forums)

...planning on loading? Debian? Here is the Perc 5/i driver and firmware links Firmware - www.dell.com/.../poweredge-2950...menu and escape to prompt, you can run the firmware update from that dos prompt. 32Bit...

...so that's what I was looking for...following: Firmware version..............5.0.1-0030 Min Firmware V. Req...this. Looks like I may have been...trying to update the Firmware and Driver so...

...devices, such as the PERC, DRAC, NIC's...driver before the firmware (I did not bring it up...like trying to update firmware to fix a problem (updating PERC firmware when a drive is failed...with one update, but I have found this to...

I just downloaded the firmware upgrade for my PERC 5/i internal adapter...bat. I ran this update... ║ Package Version 5.2.1-0067...package will update the firmware of your Dell PERC 5 ║ ║ controller...
12/4/2012  |  (Forums)

...PowerEdge RAID Controller 5/I Adapter Firmware release Package Version 5...Precision RAID Controller 5 Firmware release Package Version 5.0.1-0030? Is a new firmware image for the Precision PERC 5/i going to be available soon...
2/10/2007  |  (Forums)

theflash - those links are dead, is there any way you can get an updated list for those links? I've searched everywhere and I can't seem to find the PERC 5/i Integrated Driver version 2.23.00.64 on a Windows 2008 R2 64-bit PowerEdge 2950.

...looks like this: Controller PERC 5/i Integrated (Embedded) Controllers... Status : Non-Critical Name : PERC 5/i Integrated Slot ID : Embedded State : Degraded Firmware Version : 5.0.1-0030 Minimum Required...
7/2/2013  |  (Forums)

...poweredge-1900 The driver for the Perc 5/i and the Perc 5/e reside in the same file. So it will have both listed. This is the Perc 5/i firmware - www.dell.com/.../poweredge-1900 ...

...updated the BIOS and the PERC 5/i to what I believe are the newest releases. I plan on doing the ESM/BMC today. The order of updating I followed are BIOS, PERC 5 firmware, than the ESM/BCM. I'll finish updating the rest...

...from 5.1.1-0040 to 5.2.2-0072" ... I guess I assumed you had not already...which is probably also why I started lecturing on the importance of firmware updates :)). Generally...do BIOS, ESM, then the PERC (driver first), DRAC...

Just a head's up ... you should really update the BIOS and ESM before updating the PERC firmware.

1  2  3  4  5  6
Showing 61-80 of 975 Results
Provide Search Feedback
Were you satisfied with your search experience?
Yes
No
| Write and Tell Us More
snUX06