|
Search Results for "cisco fast ethernet"

Narrow your selection:

Community Discussions

See Results from:

Showing 1-20 of 82 Results
1  2  3  4  5
...everything and have redundancy so I ended up using a bunch of 10/100 ports on my Catalyst 3750 PoE switch for Guest machines and...one Dell to the other Dell to find the working uplink when the cisco STP auto disables one of the ports Can I do this, even though...
1/22/2014  |  (Forums)

...10-11 no shutdown Cisco 6509 (CATOS) #channelprotocol... #module 1 : 48-port 10/100/1000BaseT Ethernet ! #module 2 : 48-port 10/100/1000BaseT Ethernet ! #module 3 : 48-port 10/100/1000BaseT Ethernet ...
9/16/2013  |  (Forums)

...between a dell pc6248 and a Cisco router. The trouble is i lost...configuration on switch: interface ethernet 1/g48 switchport mode...1-2 exit interface ethernet 1/g43 switchport mode...exit On router interface fast 0/1 no ip address no...unttag VLAN (same as native in Cisco), and i can configure VLAN...
1/15/2014  |  (Forums)

...100.187.2 interface ip 10.100.187.2 ospf exit interface ip 10.100.187.2 ospf cost 1 exit ========== Cisco 2620 - 10.100.187.1 ========== ...
2/3/2008  |  (Forums)

...that require me to turn 3 new cisco 2960 L2 switches into trunks...from a pc connected off of the cisco switch, but I am unable to...configs for both the dell and the cisco switch minus proprietary information...255.255.0 192.168.10.100 ip route 192.168...
11/1/2010  |  (Forums)

...other traffic) from a 2nd SSID on the Cisco AP to the pfSense DHCP server. Here's the general setup: Cisco 1140 AP with 2 SSIDs/VLANs. Native...It is enabled for a range of IPs in the 10.100.1/24 subnet. I've also created...
(Forums)

...known configuration for the dell and cisco trying to get them to come up with no luck. I set the cisco's VTP to transparent didn't work...shows a link but when i switch it to 10/100/1000 the Cisco gets a link light and the dells link...
5/10/2006  |  (Forums)

...connection VLAN config on CISCO multicast> (enable...2-20 and set config (CISCO) begin ! ...set interface sc0 1 10.10.100.100/255.0.0.0 10... #module 2 : 52-port 10/100/1000 Ethernet set vlan...

I just put a new PowerConnect 2724 switch in service replacing an existing Cisco 2924XL enterprise 10/100 switch. I was expecting to see some increased performance in our workstations, but cannot. In fact...
5/28/2007  |  (Forums)

Hello, I currently have a Cisco ASA 5520 (firewall) that I am trying to...Interface (attached to Host with IIS) 10.10.100.2 255.255.255.0 Host with IIS: 10.10.100.10 255.255.255.0 Any suggestions...
8/18/2006  |  (Forums)

...in a large office. Most of them are Precision 340 with integrated 3C920 NIC. They connect to a Cisco Catalyst 6500 switch, on a 48 port 10/100 switch module (WS-X6348-RJ-45) The problem is some workstations occasionly loose the network...
2/25/2004  |  (Forums)

...gotten it to work with any 10/100 based devices properly. This switch is connected to a Cisco 2620, PIX 520, and VPN...around this. In fact, no 10/100 based devices (access points...cannot put Gb NIC's in the Cisco devices, so we need this...
1/17/2005  |  (Forums)

...network. I have a Cisco Router with the following...100 router-id 10.100.1.5 log-adjacency-changes...30 [110/76] via 10.100.1.5 11:43...30 [110/76] via 10.100.1.5 11:43...offices where I have a Cisco Layer 3 switch...
4/20/2006  |  (Forums)

...are considering purchasing the Cisco SG 200-18P to connect all our...1.25Gbps fiber using the “Cisco SG 200-18P” and the second...considering replacing the 3348 with Cisco SG200-50 10/100/1000 switch. Same questions...
(Forums)

...1 days 14 hrs 11 mins 5 secs 10/100 Ethernet/802.3 interface(s)............. 5 Gig Ethernet/802.3 interface(s)................ 2 10Gig Ethernet/802...

...doing was wiping out both the Cisco router and the Dell switch and starting from scratch. On the cisco router I created 3 VLAN's and 3 sub interfaces for the ethernet port, assigning each sub interface...2.30.34 from 10.2.10.100 will get a reply? ...

...uplink a PowerConnect 5324 to a Cisco 4006 with a 24 port gig module...switch. If I set the port to 10/100, it works fine. If I uplink...to a fiber module on the same Cisco switch, it works fine. If...to be specifically related to Cisco's gig module and the PowerConnect...
11/4/2004  |  (Forums)

...M8428-k CMC 3.1 Dell 10/100/1000Mb Ethernet Pass-Through CMC 1.0 ...Brocade M5424 CMC 1.2 Cisco Catalyst CBS 3130X-S CMC 1... Brocade M6505 CMC 4.3 Cisco Nexus B22DELL CMC 4.3
(Forums)

...have switches witn 2 gig uplinks and 48 10/100/100 gig eithernet ports I want...to be on ip 172.16.4.x attached to cisco router port GE1/0/0 i want the...be on ip 172.16.14.x attached to cisco router port GE1/0/1 The router...

...between the Dell switches and Cisco Switches. I have a Catalyst...switch module in it. My Cisco config looks like: ...switchport on the catalyst is a 10/100/1000 blade and if I try to...swallow their pride and just let Cisco manufacture their networking...
11/3/2003  |  (Forums)

1  2  3  4  5
Showing 1-20 of 82 Results
Provide Search Feedback
Were you satisfied with your search experience?
Yes
No
| Write and Tell Us More
snUX05